Tork: 26.3(4.8V)-40.6(7.4V)kg.cm

Hız: 0.19(4.8V)-0.13(7.4V)S/60°

Ebat: 36.5x21x40.5mm

Ağırlık: 73gr

Kablo Uzunluğu: 300mm

Voltaj Aralığı: 4.5V-8.5V

WIDE VOLTAGE LINEAR HALL SENSING SERVOS
Dimensions：36.5×21×40.5mm Voltage Range：4.5V - 8.5V

MPH83TWV

No.02410

• Torque：40.6(7.4V) / 26.3(4.8V) kg･cm
• Speed：0.13(7.4V) / 0.19(4.8V) sec/60°
• Weight：73g
• High-Torque Type
• For Aerobatic Airplanes/Large Scale Aircraft

MPH83SWV

No.02411

• Torque：19.8(7.4V) / 12.8(4.8V) kg･cm
• Speed：0.06(7.4V) / 0.09(4.8V) sec/60°
• Weight：73g
• High-Speed Type
• For Aerobatic Airplanes/Large Scale Aircraft

MPH83GWV

No.02412

• Torque：4.2(7.4V) / 2.7(4.8V) kg･cm
• Speed：0.05(7.4V) / 0.07(4.8V) sec/60°
• Weight：65g
• For Gyro
  
  
  

Hall Sensing IC has been provided on Position detection which attain durability and linear transitions of the servo. The New generation Linear hall sensing servos now with Wide Voltage which comply with standard Voltage to highvoltage.

For Aerobatic Airplanes / Large scale Aircraft.

High Torque Type

• Slow start function
• Metal Gear
• Heat Sink Case
• With Ball Bearing(dual)

[Slow start function]
This function is to avoid any potential damage to the linkage on Giant scale airplanes with the moving surface of wings.On initial power up this servo returns to the neutral position very slowly to avoid this problem. 

* Do not use this servo under the different voltage other than specified
* If used on a large control surface - typically aileron, rudder, elevator or flap on an airplane, Digital servos (DS·MP·MPH series) may move slightly around center while on the ground. This is an expected phenomenon, and will not occur in the air.