This is the Deep Vee 46" Fiberglass Boat by Prather. The Deep Vee is Designed for a 11cc to 15cc (.67-.91cu. in.) Nitro or 22cc to 30cc Gas Inboard Engine. FEATURES: Epoxy fiberglass hull Factory joined deck and hull Marine ply motor mount rails Plywood bulkheads Foam flotation Complete instruction booklet with photos INCLUDES: One Epoxy boat hull One Plywood transom plate One Stuffing box support One Hardwood front rail cross block Two Wood motor mount rails Four Tank eye screws One Plywood tank plate Two Foam flotation tubes SPECS: Length: 46" Beam: 14" Engine: 11cc to 15cc glow or 22cc 30cc gas REQUIRES: 11cc or 15cc inboard engine Running Hardware (PRAB1320) 2-channel radio with one hi-torque and one steering servo. Hatch Cover (PRAB1230) Radio Box Kit (PRAB2305) Cable Collet for 3/16" flex cable, to fit threads on your engine crankshaft Exhaust Throttle Radio box Seals and Push Rods (PRAB2325) Tuned Pipe, coupler and clamps Pressure Fitting Starting equipment Field and building equipment REQUIRED 8" Triangle TOOLS: Sandpaper and sanding block Drill and bits Dremel Tool with metal cutter and saw blade Soldering Iron 1/2" Round file C-Clamps Screw Drivers and Pliers